Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- ne:sdn-hardware [2022/06/23 14:02] – [SDN Hardware] admin
+++ ne:sdn-hardware [2022/08/31 12:03] (aktuell) – [BISDN Konfiguration] admin
@@ Zeile 3: / Zeile 3: @@
 Im Labor stehen 2 SDN Switche zur Benutzung bereit:
-== EdgeCore AS4610-54T ==
+=== EdgeCore AS4610-54T ===
   * 48 Port - 1 Gbit/s
   * 4 Port SFP+ - 10 Gbit/s
   * 2 Port QSFP+ (20 Gbit/s - Stacking Ports)
-== Delta AG5648V1==
+=== Delta AG5648V1 ===
   * 48 Port SFP28 10 - 25 Gbit/s
   * 6 Port QSFP28 - 100 Gbit/s
-=== Installation/Upgrade ===
+==== BISDN Installation/Upgrade ====
+  * Anleitung: https://docs.bisdn.de/getting_started/install_bisdn_linux.html
+  * BISDN-Images: http://repo.bisdn.de/pub/onie/
-   run onie-rescue
+=== Installation via USB: ===
+mit Console-Port verbinden, reboot Switch, U-boot abbrechen durch Tastendruck
+<code bash>
+run onie-rescue
+blkid # Info über angeschlossene Speichermedien
+mkdir /tmpInstaller
+mount -t vfat /dev/sdb1 /tempInstaller
+onie-nos-install /tempInstaller/onie-bisdn-accton-as4610-v4.6.1.bin
+</code>
+=== Installation via Netz: ===
+<code bash>
+run onie-rescue
+onie-nos-install http://repo.bisdn.de/pub/onie/agema-ag5648/onie-bisdn-agema-ag5648-v4.6.1.bin
+</code>
-=== Konfiguration ===
+==== BISDN Konfiguration ====
-Auf den Switches ist Baseboxd installiert
+Auf den Switches ist Baseboxd installiert.
 <code bash>
@@ Zeile 32: / Zeile 48: @@
 Disable auto-negotiation und Portspeed auf 10Gbit/s:
 <code bash>
-client_drivshell port xe0 AN=off sp=10000
+sudo client_drivshell port xe0 AN=off sp=10000 #port 49-50 (xe0-xe3)
+sudo client_drivshell port 50 Enable=false
+sudo client_drivshell port 50 Enable=true
 </code>
 Use the following command to print the current port configuration:
 <code bash>
-client_drivshell ports
+sudo client_drivshell ports
 </code>
-Use the parameter ps to list all ports or ps <port number> to list one specific port.
+Use the parameter ''ps'' to list all ports or ''ps <port number>'' to list one specific port.
 <code bash>
-client_drivshell ps 1
+sudo client_drivshell ps 1
 </code>
@@ Zeile 52: / Zeile 70: @@
 sudo ip link set port48 up
 sudo ip address add 10.0.0.1 dev port48
+ethtool port48
 </code>
+**SDD - Write Cache disable:**
+I created a ''hdparm.service'' file in ''/etc/systemd/system/multi-user.target.wants'' with the following settings:
+<code>
+[Unit]
+Description=hdparm write cache disable
+[Service]
+Type=oneshot
+ExecStart=/sbin/hdparm -W0 /dev/sda
+[Install]
+WantedBy=multi-user.target
+</code>
+==== Management Interface konfigurieren:  ====
+In ''/etc/systemd/network'' eine Datei anlegen ''70-enp.network'':
+<code bash>
+[Match]
+# You can also use wildcards. Maybe you want enable dhcp on an all eth* NICs
+Name=enp*
+[Network]
+#DHCP=v4
+# static IP
+Address=172.16.1.8/24
+Gateway=172.16.1.1
+DNS=141.45.2.100 141.45.3.100
+</code>